Termékek csomagküldési szolgáltatások (659)

Special sealers ME 455/605 VAD with air suction system (max 80%) suitable for volume reduction and better preservation of products. The machine is equipped with a double sealing bar with a sealing width of 5 mm, an electric pedal drive and pneumatic cylinders, mobile nozzles for air intake, an adjustable timer for suction, sealing and cooling. The ME 4510/6010 VAG model with a ATM gas injection system is also available. This variant is equipped with a double sealing bar with a 10 mm sealing width, electric pedal drive, mobile nozzles for air intake and gas injection, adjustable timers for suction, intake, sealing and cooling. Max. seal length:mm. 450/mm. 600 Seal width:mm. 5 Sealable materials:PE-PP-AL/PE

Digital and semiautomatic bench sealer, with electric pedal and sealing bars at constant temperature, for closing polypropylene bags and laminated / laminated aluminum, paper, barrier materials, etc. The "hot bar" type sealing bars are equipped with resistance and electronic thermoregulator. Thanks to the new latest generation electronic control card, all controls, adjustments and alarms are more easily set. The digital control of temperature, time and pause interval, it is more precise and functional, thanks to the new control panel, and to the large 1-line by 16-character alphanumeric LCD display. Temperature adjustment 0-150 ° C, with alarm of ± 5 ° C with respect to the set temperature. The closing of the bars takes place by means of an oversized electromagnet which guarantees a high sealing pressure and allows the sealing of high thickness envelopes with or without side gussets. For a higher production it is sufficient to select the automatic cycle with timed closing. Seal bars length:mm. 300 Seal width :mm. 13 Temperature range:0°C÷150°C

Sealer machine with quick closing lever for sealing bags in plastic material heat-sealable, with impulse sealing (resistance heats in a few seconds) and timer for adjustment. The welding cycle is indicated by an indicator light. The double sealing bar (top and bottom) with welding of 10 mm allows the closing of envelopes with high thickness, coupled bags and bellows. Through a selector switch, you can choose whether to use one or two welds. The maximum thickness of weld is 0.25 mm x 4 (total 1 mm). Model:ME 3010 FH Max. seal length:mm. 310 Seal width:mm. 10 Dimensions:mm 420x370x270 h Weight:Kg. 12

Automatic banding FP TZ 888 simple and inexpensive, using paper and polypropylene tapes 30 mm. width. Maximum useful sizes mm. 240x140 h. (lenght unlimited). Speed up to 25 cycles per minute. The tape's tension is adjustable by knob. Manual or automatic operation. The banding FP TZ 888 in addition to the classic use in graphic arts, binders, paper industries, is particularly suitable for the realization of multi-packs or for the matching of multiple products in sales promotions. Useful dimensions:- Width from 40 to 240 mm. - Height from 5 to 140 mm - Lenght from 50 mm. to unlimited Max speed:25 cycles/min. Tape width:mm 30 Electric Supply:220V - 50 Hz - 150W

Mechanical eyeletting machine with double heads for 9 mm eyelets, 7 mm, type 051 - Eyeleting with mechanical pedal, double head with automatic feeder and support frame, suitable for any process where it is required the simultaneous closing of the two eyelets. The eyeletting is applied in the paper converting industries, offices bank or post office, anywhere where there is a need to securely seal their products but use is higher in the food industry for sealing and the simultaneous application of cards printed on plastic bags. Steel painting base plate:mm. 360 x 500 Usable eyelets:type 7-9-050-051 Distance between heads:from mm. 40 to mm. 200

FP 15 SE STRETCH-WRAPPING MACHINE with electronic board and digital keyboard, inverter to control the progressive start and turntable rotation speed, 4 wrapping programs, electromagnetic clutch for film tension control, photocell for automatic reading of the pallet height, manual hook up/cutting of the film, and automatic wrapping cycle (CE-standard). Max load capacity:Kg. 2000 (3000 kg with optional) Turntable diameter:mm. 1500 Max pallet dimensions:mm. 1000 x 1200 Max pallet height:mm 2200 h (3000/3200 mm with optional) Turntable rotation speed:4 - 7 rpm Turntable height:mm. 75 Installed power:Kw 0.6 machine size :mm. 1500 x 2500 x 2550

Vacuum packaging machine large with two perpendicular sealing bars and stainless steel construction (AISI 304), with digital panel and volumetric electronic sensor for constant vacuum control. Using the short sealing bar can package products with lengths up to 820 mm. Instead using the long bar can be made more packages with a max lenght of 520 mm. The vacuum pump 40 m³/h. ensures a high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of bars :2 Sealing bars length:mm 500 + mm 760 Work cycle:about 30 sec Vacuum pumps:40 m³/h Useful width :mm 820 Useful lenght:mm 530 Useful height (chamber + lid):mm 120/190

Pneumatic eyeletting machine with double heads for 9 mm eyelets, 7 mm, type 051 - Pneumatic eyeletting with dual head with automatic feeder, suitable for any process where it is required the simultaneous closing of the two eyelets, complete with support frame and security guards. The eyeletting is applied in the paper industries, offices bank or post office, anywhere where there is a need to securely seal their products but use is higher in the food industry for sealing and the simultaneous application of cards printed on plastic bags. Steel painting base plate:mm. 360 x 500 Usable eyelets:type 7-9-050-051 Distance between heads:from mm. 45 to mm. 100 (from mm. 45 to mm. 180 optional)

Suitable for all types of neutral or printed film (preferably with antistatic treatment) or tubular polyethylene with thickness from 0.06 mm to 0.13 mm or tubular polypropylene with from 0.03 mm to 0.05 mm thick, and cartene normal or high density. Furthermore, with the FP BAG EVO it is also possible to use expanded polyethylene (FOAM) in tubular reel with a maximum thickness of 1.5 mm. It can use reels with a width of 80-300 or 100-500 mm without disassembly of parts or changing settings. The packaging machine automatically perform the forming of the bag with the upper opening. The filling of the bag and the subsequent closing can be done manually by an operator who starts the cycle of the machine through a button, or automatically by means of feeders, manipulators, weighers. The reel change takes a maximum of thirty seconds. The machine cycle time for the preparation of a bag 200 mm long is about four seconds. Example model:FP BAG EVO 300.1 Film reel width:mm 80-300 Reel external diameter:max. mm 350 Reel maximum weight:kg 15 Bags lenght:mm 25-999 Production:10-20 pieces/minute (depending on the length) Usable film:tubular polyethylene thickness from 60 to 130 microns Usable film:expanded polyethylene with a maximum thickness of 1.5 mm Usable film:polypropylene and HDPE film with thickness from 30 to 50 microns

PORTABLE INKJET MARKER MOD. FPA2-SMART MOB - MAXIMUM PRINTING HEIGHT 12.7 mm New portable inkjet marker, suitable for marking on porous, semi-porous (boxes, cardboard boxes) in different work stations. Allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on 4 lines with a total height of 12.7 mm. The marking speed is set directly on the marker keypad and you can always write accurately and without deformation of the characters. The cartridges are independent and directly in contact with the print head. The marker is equipped with an automatic nozzle cleaning system so in case of very long machine stops, there is no danger of blocking, but simply replace the exhausted cartridges without further maintenance. The message to be printed can be set by PC in any Word font format. To use it, simply save it on the SD card included in the machine. Printable products:Porous and semi-porous surfaces Print engine:Hewlett-Packard Thermal Ink Jet Technology 2.5 Print speed:57 m/min at 400 dpi, horizontal resolution Maximum printing height:12,7 mm Minimum printing height:2,7 mm Print distance:6 mm recommended Memory:999 messages for a single SD card Printable elements:alphanumeric writings, logos, date/time, codes, counter, lot and barcode Autonomy in use:7 hours (9 hours on standby) Battery life:more than 300 cycles

BS 8060 LINE SEMIAUTOMATIC ANGULAR PACKAGING MACHINES Large angular packaging machines with manual or automatic closing of the sealing bar and motorized carpet for product discharge. This machines are capable of packaging bulky products using any type of single-folded film reel (PE-PP-PVC). The package is sealed on all sides, and if you want a thermo retracted packaging, the machine can be matched to the powerful tunnel BS 5540 M. Features: NI-CR sealing blade with non-stick coating Sealing time control to avoid overheating Adjustable conveyor height by handwheel Double magnet for a high closing force Reel sliding on recirculating ball guides, useful width mm. 750 Return of the sealing bar controlled by a gas spring (for manual version BS 8060L) Pneumatic device (compressed air) for closing and opening the sealing bar (for the semi-automatic version BS 8060LA) Example model:BS 8060L Sealing bars dimensions (mm):800x600 Support plan dimensions (mm):780x580 Max. product height (mm):250 USABLE MATERIALS:PVC, POLYOLEFINS, CRYO THERMO

Sacchetti in carta kraft BIANCA o AVANA di pura cellulosa, fondo rinforzato, con soffietti laterali. Ideali per il take away e la conservazione degli alimenti. Utilizzati prevalentemente per il confezionamento e l’asporto di dolci secchi, cornetti, pane, pizza, frutta. Sono spesso usati anche in tabaccheria, ferramenta, merceria e farmacia.

DISPENSER FOR WINDING PANS Minidispenser is a handy dispenser extremely functional and easy to use. It is the ideal machine for wrapping with stretch film suitable for all types of food in the trays. Structure:Stainless steel Sealing plate size:mm. 385x123 Sealing plate temperature:adjustable Max reel width:mm 500

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal Model:MG 820 Max. seal length:mm. 820 Seal width:mm. 5 Power:900W Dimensions:cm. 96x20x27 Weight:Kg. 26

TAPING MACHINE MOD. FP 9036 WITH MANUAL ADJUSTMENT AND 2 LATERAL DRIVE BELTS The taping machines series FP9036 and FP9037 are used in semiautomatic lines for the quick and safe closure of boxes using adhesive tape. The two taping heads simultaneously apply a strip of tape above and below the box. Depending on the size of the boxes (height and width), the operator must adjust the taping machine using handy handwheels. In the FP9036 model the structure of the machine body is in painted steel sheet and the cartons are dragged through 2 side drive belts. The machine is complete with 2 idle roller conveyors attached to the taping machine with length mm. 400 (for loading and unloading). It is equipped with wheels with brakes. Min. size (LxWxH):150 x 120 x 100 mm Max size (LxWxH):unlimited x 500 x 500 mm Tape width:50 mm Tape type:PPL-PVC Operation speed:20 m/min Belt drive :Left and right

Professional manual tackers Rocama 10/20 with body made of aluminum alloy. Loading dock below. Ideal for fixing labels on packaging and protective materials in wood, for assembly of frames and frames for decoration work, to set wallpaper, baseboards and wood profiles, for exhibitions stands, furniture stores, interiors of homes, caravans, campers and coatings of sofas and furniture. Equipped with power regulator. Available in two models: Rocama 10 for staples series AP with length of 5-8-10 mm, with total width 10 mm, section 0,45x0,90 mm. Rocama 20 for staples series AP with length of 10-12-14-16-20 mm, with total width 10 mm, section 0,45x0,90 mm, brads series FAST M of 20 mm and pin series FAST W of 20 mm, section 1,00x1,25. Example model:Rocama 20 Charger capacity:100 staples Staples lenght:from 10 to 20 mm Staples:AP 110-112-114-116-120 Pins:FAST M 20 with head – FAST W 20 without head

Particolarmente adatta ad essere utilizzata con cibi umidi e grassi perché possiede uno strato di politene interno che evita che la carta si macchi esternamente ed isola il prodotto mantenendone intatta la freschezza. Idoneità totale al contatto alimentare. MATERIALE:CARTA POLITENATA

Manual eyeleting machine suited to the insertion of the eyelets on boxes of pasta, biscuits and food in general. The eyelet is very used to attach the jumper on which are printed all product-related information. Usable eyelets:eyelets diameter mm. 7 and 9 Total Length:mm. 220

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polypropylene PP and polyester PET width 13-16-19 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:from 13.0 to 19.0 mm Strap thickness:0,60-1,27 mm Air pressure:6 bar Air consumpt:12 Lt. / sec Weight:5,2 Kg

L-SEALERS BSF SERIES The manuals bench L-sealers BSF series are very simple and practical. Allow to obtain the envelopes perfectly sealed, using standard fold film. They are suitable for use in laundries and textile sector in general and in the paper industry, but are also helpful in the food industry for the packaging of the bread. Sealing bar with manual operation. The choice of the machine must take into account that: the dimensions of the box (height + depth) must not exceed the maximum width of the reel mounted on the machine (depending on the model) also considering that there must always be at least 50 mm of waste. To confirm that the machine is suitable, we always advise you to contact us and report the measurements of the boxes to be packaged. Example model:BSF-501 Electrical supply (V-Hz):220-50 Power (Kw):1 Sealing area (L x W):500×350 mm Max. roll width:mm. 500 Sealing:wire seal (approx. 1 mm) Adjustable sealing time:0~2 sec Overall dimensions (L×W×H) (mm):950×550×370

Clipping machine FS CL 11-20 with ring closure for the assembly of wire mesh, springs for mattresses, fencing and packaging. Aluminium body, rubber grip, return of pneumatic gripper (without spring). Storage capacity:200 rings Working pressure:6 bar Width open loop (external):mm 19,3 Closing diameter:from 4,8 to 6,8 mm Type of ring used:FS 20 Z with wire diameter 1,50 mm

Grembiule monouso MATERIALE:PE

LEVER OPERATED YELETTING MACHINE, WITH SINGLE HEAD, automatic feeder, cast-iron frame, without stand. Suitable for smaller volume applications and where one eyelet are required. Ideal for automatic application of warranty seals in cardboard industry, bank office, post office and in many others field. It is especially used in food industry for to seal and at the same time for to apply a printed card on plastic bags. Structure :Cast-iron frame Painted steel base plate:mm. 310 x 240 Usable eyelets:type 7-9-050-051

CHAMBER VACUUM PACKAGING MACHINE DZ 410 T - VERTICAL Vacuum packaging machine for packaging in vertical envelopes containing coffee, rice, tea, powder products, fluid products, etc. The machine is built in stainless steel (AISI 304) and equipped with an electronic volumetric sensor with 3 programs digital panel. The compact size chamber and the vacuum pump with a capacity of 20 m3/h. ensure high productivity. Also available with filter for packing powdery products such as hazelnuts flour, milk powder and products with similar characteristics. The filter must be requested at time of order. The packaging machine is equipped with a painted wheeled support. Max thickness bag mm. 0.20 (0.8 total with bellows). By equipping the machine with jigs realized according to the specific dimensions of the product to be packaged, it is possible to obtain squared packs. The templates are not included with the machine. Sealing bar length:mm 400 Sealing width:mm 10 Chamber size:mm 400 x 85/180 x 350H Maximal product height:mm 300 Vacuum pump:20 m³/h Cycle Time:about 25 sec.

Busta trasparente adatta a capi d’abbigliamento, realizzabile neutra o stampata, aperta su un lato.

Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the base of the pallet, select the wrapping program and press the start button. The machine automatically winding and stops. Cut the film manually. Attention: the pallet must not have the inner crosspieces on the side of the transpallet. STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and failures due to the use of an unsuitable product. Max capacity:Kg. 1000 (1500 with optional) Turntable diameter:mm. 1500 Max. pallet dimensions:mm. 1000 x 1200 Turntable speed:adjustable 4 - 7 rpm Power supply:380V 50Hz. + T + N Installed electric power:Kw 0,6 Machine Dimensions:mm.1500 x 2500 x 2250 h Weight:Kg.380

Sturdy and professional roll holder suitable for the unwinding of heavy plastic reels film made of polyethylene. Load 100 Kg. Very robust reel holder, made of painted tubular steel and equipped with wheels with brake, it supports rolls with a weight of up to 100 kg and allows an operator to carry them out safely. The reel holders are made with the reel axis diameter 60 mm and length up to 2200 mm, very simple to rotate as it is mounted on ball bearings and equipped with cones for locking the reels. Depending on the presence or absence of the brake, the total width of the roll holder is approximately 200/300 mm wider than the useful width. The reel holder axis can be "idle" or "with brake". Reel holder axis:diameter 60 mm mounted on ball bearings Useful width:can be made to order from 1000 to 2200 mm Load:100 Kg Dimensions:depth 600 x height 800 mm

CF SERIES - CONSTANT TEMPERATURE HEAT SEALERS WITH PEDESTAL AND FOOT PEDAL ( for multi-layer bags) THE CF SERIES of constant heat sealers with pedestal and operated by foot pedal, are ideal for sealing bags made of compunds, multi-layer films, co-extruded films, OPP, heat-sealable cellophane. It is not suitable for polyethylene films. Being operated by foot pedal, the hands are free to feed the machine. The sealing jaws of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The temperature of the sealing jaws is adjustable according to the type and thickness of the material to be sealed, and is kept constant by a heat thermo-regulator. The maximum sealable thickness, that always varies according to the type of sealable material, is 0.25 mm. (50 mm. total). Also available in CFN version with timer and acoustic signal at the end of sealing. Example model:ME 300 CF seal length:mm. 300 Seal width :mm. 14 Height of sealing bars from the ground :mm. 800 Type of bars:Cross serrated Sealable material:PP-AL/PE Power supply:220Vv

Table top sealer with electric foot pedal and impulse seal suitable for the closures of envelopes in heat-sealable plastic material such as polyethylene, polypropylene, PVC, etc. The foot pedal with magnet hold downd closure, allows the operator to have both hands free. Simple to use and does not require preheating.

The ultrasonic sealers are ideal for sealing trays and plastic blister ( OPS, PSP, PVC, EPS) food grade or technical. This equipment is fast, secure, clean, simple and do not require preheating. This welding machine is widely used in the food industry and for technical welding trays and blisters in OPS, PSP, PVC, EPS, PET and replaces the dangerous staples The heat developed by the friction is transmitted to the two surfaces in plastic material and welds them instantly with a point and smudge resistant, the welding power is adjustable via potentiometer. Ceramic components with high precision is capable of producing an ultrasonic vibration of 55000/60000 cycles per second. Model:ME 405 US Sealing length:mm. 4 Sealing width:mm. 3 Power supply:220V Installed power:40W